Відео

I don’t wanna say the wrong thing and get you in trouble but I honestly don’t think depth of tread makes but so much difference on sand. Maybe I’m wrong that’s literally just my guess. If you’re aired down I think it’ll be good. Over the years I’ve found 18-20 front and 16 rear works best for me. Truck doesn’t have any issue whatsoever and rides super smooth. Be careful on the road with those tires. If gotten down to bands before because of a bad alignment, it’s not a good feeling. Hope you have a great trip.

@@TheChapMX yeah i agree just figured I’d see what you thought as well, I should be fine, thanks man have a good one

@@virginiaoutdoors4488 heck yeah I’m always down to at least try to help ! Enjoy!!

@@TheChapMX put her ass in first and let her eat, didnt have any issues at all even in the thicker sand

So glad it helped! It’s not a bad job to do and it makes a monstrous difference!! Take care

@@TheChapMX I haven’t done it yet but I will eventually if I can get my lazy bum up lol. By the way any where to buy any OEM bushings?

I did so much research man, hard to find definite answers. These wheels were 16x8 and 16x7 up front. The offset was +25 on all 4. The fit was great! I wanted a functional flush look, no poke or anything. Worked great for me and I didn’t have to roll any of the fenders at all. I gotta go back to be sure but if I remember right the tires were 205/45-16s. Let me know if I can help with anything else. Thanks for checking it out.

Hahah many folks of all ages stronger than me Ain’t no thing

You stop!! People that talk the way you do can't lift the bar most of the time... whereas a person who trains just as hard but might be stronger will never say anything like that. This was a good lift by this guy because he's out there working harder than last time

@deadlift902 Thank you for taking the time to comment. You made my day quoting Coach Greg. I just do what I can as best I can and that’s all we can do! Take care and thank you again.

@TheChapMX My pleasure sir, God bless

Yeah, and what ?! IT DOESEN'T FUCKING MATTER IF SOMEONE LIFTS MORE OR LESS.

I know, it’s kind of embarrassing. Most wouldn’t use them at twice this weight. I don’t use straps until I get to that days working weight. With 7 vertebrae fused, I have to be really careful with this movement so when I get up to the weight I’m really pulling hard to do I want to put all the focus on my form. As the working weight goes up, the weight I go no straps with increases as well. Correct? Idk, but it’s what I do and it works for me. Thanks for checking it out.

@TheChapMX I wouldn't say it's embarrassing I was just curious if you were doing anything to counteract the strength lag. Sorry to hear about the back issues. Have you seen that deadlifting helps the issues or are you doing it despite aggravation?

Mentally and physically it has helped me a ton. I took it very easy when I started and have slowly built my way to where I am now. It took me a good bit to be able to get in an even acceptable form, I was squatting too much vs hinging at the hip enough. With a few tweaks and strains over the course of time it felt like my back loosened up a bit and now feels much stronger and more supportive. This movement alone has helped me so much for motocross strength which is mainly what I train for. Mentally I was nervous about it and laying in a hospital bed wasn’t sure I’d ever deadlift again but with the slow increase of weight the confidence has built and it’s helped me tremendously.

I seen a girl using straps to half squat 1 plate last week 😂 I mean people just need help I guess I don’t even squat and I’m 145 and can do 3 plates with no assistance

Hahahahah a very important thing to take care of BEFORE you start!!

Thank you! It worked out well for me.

Glad you saw it and it helped, you won’t be disappointed with the Bilstein setup!

And the strip of cardboard in my hats

@@TheChapMX It's only original once. Who would ever want to buy a light truck with pennies in the ashtray?

@@bobechs7234 I mean I guess I could use it for fuel money or a York peppermint pattie if they were so kind

My thought process was since they figured tension was best lower with the original strap I'd go with that, I just made sure not to overtighten it. That ratchet could def. rip on down on it, just don't go crazy with it. Its def. a backup not something to pull the legs inward. If that makes sense.

Hahahahha

@@williammaes This isn’t a step by step tutorial it’s a before and after vid there’s a difference.

@@D4rkShad0w02 what's the point? See shifter wobble, now shifter no wobble....

Hahahah that’s what I’ve been saying for this whole 2 week project

@TheChapMX yea Ford loves pulling moves to screw mechanics lol screw em!

@@DankestNumber I do agree Those freaking c pillar interior panels that go over the rear speakers fight me for 40 min every effin time

@TheChapMX sounds like a ford!!

I appreciate that a lot !!! I’m glad you enjoyed them and thank you for checking them out

Go on and get it!! They are timeless you will love it

Maybe so, made things easier for me !

Thank you!

I'm at about a 7 1/2 in fitted and I wear the classic size. I've tried the XL and its just too big circumference and depth. Hope that helps.

Hmm, I'm never against any advice but can't see where having it on the ground would help anything. I'm down for some learning though!

@@TheChapMX so maybe the sand filter setup you have is different,but I have a 2500 gpa cartridge filter and was installed on a stand I made .seemed like every day air would get trapped inside .sometimes would only be 3/4 full of water.i put it on the ground and that issue did not return and the pressure feels stronger now

Man its these sort of comments that just make my dern day! Love hearing your story and the fact it was your first truck! Funny thing is with my first truck I had the same exact trip to Circuit City and did the same thing. The good ole days! I know you hate you sold it but you might could find another one. Thank you for the time you took to comment! I plan to do more for sure! Its been in the family since '92 so gotta do it up right! Take care man.

Hahaha I know, that's why I said "they're based in California" but these days don't matter what state haha

I have to agree with your assessment!! I have had the Ray10s back on there for a few months now and it just looks much more correct to me. I wanna like the GEN5s so much and they are cool wheels but they just don’t really jive with the silver well. They are definitely cool though and the tires ride so smooth so I will just switch them back and forth from time to time. Also, much better fitment with the Ray10s. They will always be my favorite. Thanks for the comment !

It’s really nice!! If you’re willing to spend the money AND you have the space for it I fully recommend it. This thing really needs a dedicated place where it stays, I wouldn’t want to drag it in and out to use it. It’s had no issues and it is still quiet and definitely powerful! I am really satisfied with it. Just make sure you wait for it to go on sale they do it pretty frequently.

Thanks man !! I’m sure I’ll run into you out there soon !

@@TheChapMXyeh that would be really cool, I’m still trying to get comfortable on the track👍

hahah thanks man! It was a good time!

They were 16s

duh

I have not but I will look into them because I frequently have issues with these cracking from the sun. Let me know what you find out and I will do the same.

I never did. It only calls for a front driveshaft after like 20k miles or so, but I never did get another one. I never had any issues.

@@TheChapMX Thanks buddy!

I wish too, but glad you got it sorted one way or another!

I just busted another one this past week and lost a bunch of water, different location from these supports though. I will take a look at Lowes, I appreciate that.

I appreciate that a lot!!!

Sweet!! Glad it’s working out well for you. The everyday comment was meant to be speaking of when the water is green on initial fillup or after opening, if that’s the case. If I misspoke or left that out, that’s my mistake. Enjoy y’all’s pool, they’re great.

Hey Alexander!

Hahahah I can’t stand it either!!! Glad the shifter ones helped once you get the 4wd shifter straight you’ll be golden!

Dude that’s awesome thank you for watching and thank you for the comment !! Appreciate you subscribing too!! Have a good one man!

I appreciate you checking out the video and your comment man

Thank you so much, on both accounts!!! I look back to some of those videos and I’m like whew haha, had to start putting some work in towards better health. Thank you for your comment and thanks for checking them out!!

@@TheChapMX you are most welcome! Keep up the good work!! 💪🏼😊

About 32,000 👎🏽

@@TheChapMX wow not good

Thank you!!!